Built-In type/non-Contact Sensor
Aluminum High-Speed Cutting Process Monitoring Device.
ATC run-out detection system is used to detect abnormal run-out of the tool caused by entering the tool taper and to prevent machining defects.
”True run-out quantity” is calculated by storing the shape of the tool flange in the controller without run-out state and comparing it with the shape of the run-out which is measured just before machining. More highly accurate run-out measurement is achieved in comparison with the simple
run-out measurement (repeatability:30μm) by using general eddy-current sensors.
Interpolation of Notched Part
By using proprietary algorithm, reliability of the run-out measurement is improved by interpolating the notched part of the tool holder, which is the decreasing factor of the measurement accuracy.
Sampling number is automatically increased by proprietary software operation process and interpolation accuracy of the tool holder notched part is improved.
0.3 second Measuring Time
Although it is very difficult to achieve run-out measurement at 600rpm by using contact type, it is achieved by using noncontact method. In addition, by using proprietary algorithm, all the measuring processes are completed in merely 0.3 seconds (at 600rot/min).
Sensor Head Automatic Tuning Function
Replacing only the sensor is possible if damage occurs to the sensor for any reason. After replacing the sensor, combination adjustment of controller and sensor head is completed by removing the tool holder from the spindle and clicking “sensor adjustment” button once.
Most Suitable for Machining Environment
This run-out detection measuring system is coolant-resistant.