In-Process Electric Micrometer Control Unit

Higher Functionality

A higher level of functionality enables utilization of a wider range of applications.

  1. Measurement of two items: Sizing + end face, sizing + post measurement and various other variations are available.
  2. P memory function: Measurement of even or odd number of teeth on notched workpieces.
  3. P memory function: Suitable for dynamic measuring after work on surface grinders
  4. BCD/BIN output function: U1000A compliant data can be output by adding an I/O2 circuit board.

Easy Operation

LCD can display alphanumeric characters

  • Interactive operation for a wide variety of settings.
  • Measured and offset values can easily be checked on the LCD.

Same type of rotary switch as on U600 (previous unit), V7 and V8

  • Rotary switch enables intuitive operation.
  • Frequently used operations can be quickly selected.
  • Unifying operation system with U600, V7 and V8 minimizes operator load when the control unit is changed.

DSP + RISC CPU Provide High Speed and Performance

The adoption of a DSP (digital signal processor) facilitates digital processing of various signals at high speeds.

  • In addition to a smoothing filter, the unit has a standard 7-step LPF (low pass filter) selection function.
  • Real-time processing of notch processes.

Superior Ease of Maintenance

Simplified I/O Monitor

  • Wiring with machine can be easily checked.

Self-Diagnostic Program

  • Interactive verifications enable user to perform primary maintenance.

Upper Level Compatibility with U400

  • The U400 can be replaced by using an optional I/O cable.

Detachable Front Panel (V4S)

The front panel is detachable so you can position it so it is easy for the operator to use. The control board is built-in to the main unit. The panel can be located a maximum of 10 meters away from the main unit.